Pay in installments of $6.54 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jun 29 - Jul 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
aglaonema crystal bay Aglaonema 'Diamond Bay'Aglaonema 'Diamond Bay' Aglaonema 'Diamond Bay' is a silver green Chinese evergreen with broad, lance shaped leaves and a full clumping habit. The leaf blade has a wide grey green centre, deeper green margins and a smooth surface, creating a calm, evenly patterned crown. New growth rises from short basal shoots, gradually making the plant denser from the base as it matures. In indoor containers it stays compact, leafy and upright, with long petioles
Aglaonema 'Diamond Bay'
Aglaonema 'Diamond Bay' is a silver-green Chinese evergreen with broad, lance-shaped leaves and a full clumping habit. The leaf blade has a wide grey-green centre, deeper green margins and a smooth surface, creating a calm, evenly patterned crown.
New growth rises from short basal shoots, gradually making the plant denser from the base as it matures. In indoor containers it stays compact, leafy and upright, with long petioles holding the foliage slightly above the pot.
Aglaonema 'Diamond Bay' silver-leaf traits
- Broad silver-grey leaf centres framed by green margins
- Lance-shaped leaves with a smooth, gently arching surface
- Clumping basal growth that creates a full indoor plant
- Cultivated selection from the Aglaonema 'Silver Bay' line
- Steady foliage plant for warm rooms with filtered light
Silver centres and cultivar background
Aglaonema 'Diamond Bay' was selected from tissue-cultured Aglaonema 'Silver Bay' material. Its foliage differs through a broad central silver-green zone and a simpler edge pattern, with darker green margins framing each leaf.
The plant grows as a short-stemmed evergreen clump. Older leaves sit around the outside of the crown while new leaves emerge from the centre and from side shoots near the base. This growth pattern helps mature plants keep a rounded outline in pots.
Aglaonema 'Diamond Bay' indoor care
- Light: Give medium to bright filtered light. The pale centre marks easily in hot direct sun, especially close to glass.
- Watering: Water when the upper 2–4 cm of substrate feel dry. Keep the root ball evenly moist during active growth, then let it partially dry again.
- Substrate: Use a loose mix with coco coir, fine bark and perlite. The roots need moisture retention with enough air around the lower stems.
- Drainage: Use a pot with drainage holes and empty any standing water from the cover pot after watering.
- Temperature: Keep at 18–27 °C where possible. Protect the plant from cold windowsills, draughts and temperatures below 16 °C.
- Humidity: Average indoor humidity is usually enough. Very dry heated rooms can increase brown tipping and pest pressure.
- Feeding: Feed lightly in spring and summer, about once a month at reduced strength. Rinse the substrate occasionally to prevent salt build-up.
- Repotting: Repot when the root ball is firm or watering runs straight through. Move up by one modest pot size.
- Grooming: Cut ageing leaves at the base. Spathes can be removed early to keep the crown dense with foliage.
- Propagation: Divide rooted basal shoots during repotting, keeping leaves and roots on each division.
Cold, light and root checks
- Grey, water-soaked patches: Cold injury is likely. Check for chilly glass, winter transport stress or draught exposure.
- Yellow lower leaves: Check the lower root ball for wetness, dryness or compacted substrate before changing the watering pattern.
- Brown tips: Usually linked to dry intervals, fertiliser salts or very dry air. Flush the mix gently and reduce feed strength.
- Bleached pale areas: Move the plant back from direct sun or heat concentrated through window glass.
Sap safety and toxicity
Aglaonema 'Diamond Bay' contains insoluble calcium oxalate crystals. Keep it away from pets and small children. Chewed leaves or stems can irritate the mouth, lips, tongue and throat, and sap may irritate sensitive skin.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 1683 reviews
Sort
Product Reviews
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Easy peasy
Size: 1 Panel, Color: Black
Bought this single-panel room divider for my son so he has a little privacy when he has to keep his camera on for online classes.
It’s lightweight, easy to set up, and does the job—he can focus without me photobombing in the background. He can feel like he has his own tiny corner office, even if it’s just the basement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026
★★★★★ 5
It serves it's purpose!!
Size: 1 Panel, Color: Black
Product really works well & serves it's purpose! Great height & width. It's flimsy, but it will stand still when put in place.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2025